Description
This Used 1997 KTM 620EGS-E LC4-E Adventure Motorcycle Owners Handbook will familiarize you with how to operate your 1997 KTM 620EGS-E LC4-E Adventure motorcycle.
SERIAL NUMBER LOCATIONS, Chassis number, Engine number, engine type
OPERATION INSTRUMENTS, Clutch lever, Hand decompression lever, Choke lever,
Hand brake lever, Indicator lamps, ignition lock, steering lock, Tachometer,
Tripmeter, Changing the tripmeter total kilometer reading, Tripmeter
parameterization, Combination switch, Starter tip switch, emergency OFF switch,
Filler cap, Fuel, Fuel taps, Emergency fuel tap, Hot start device, Shift lever,
Kicks tarter, Foot brake pedal, Compression damping of fork, Rebound damping of
fork, Compression damping of shock absorber, Rebound damping of shock absorber,
Helmet lock, Baggage carrier
DRIVING INSTRUCTIONS
PERIODIC MAINTENANCE-SCHEDULE
MAINTENANCE WORK ON CHASSIS AND ENGINE, Tool set, Removing the seat, Bleeder
screws front fork, Checking and adjusting steering head bearing, Changing the
spring preload of the shock absorber, Lubricate shock absorber linkage, Checking
chain tension, Correct chain tension, Chain maintenance, Chain wear, General
information on KTM disc brakes, Checking of free travel at the hand brake lever,
Checking of brake fluid level – front brake, Refilling the front brake fluid
reservoir, Checking the front brake pads, Changing the basic position of the
foot brake pedal, Check the rear brake fluid level, Refilling the rear brake
fluid reservoir, Checking the rear brake pads, Dismounting and mounting the
front wheel, Dismounting and mounting the rear wheel, Checking the shock
absorption rubbers in the rear hub, Tires, air pressure, Checking spoke tension,
Battery, Charging the battery, Main fuse, Fuse fan, Removing and mounting the
headlight mask, Replacing the headlight bulb, Replacing the tachometer lamps,
Replacing the indicator lamps, Cooling system, Checking the cooling liquid
level, Adjusting idling speed, Adjusting the throttle cable, Adjusting the choke
cable, Adjusting the clutch cable, Checking the adjustment of the hand
decompression cable, Engine oil, Checking the engine oil level, Oil circuit, Oil
change and bleeding of the oil system, Changing the fine screen filter, Changing
oil filter
TROUBLE SHOOTING
CLEANING
CONSERVATION FOR WINTER OPERATION
STORAGE, Re-initiation after time of storage
TECHNICAL SPECIFICATIONS – ENGINE
TECHNICAL SPECIFICATIONS – CHASSIS
WIRING DIAGRAM
Includes translations in German, English, Italian, French and Spanish.
