Description
This 100 page, John Deere 115 Disk Operator’s Manual is a reproduction of the original out of print John Deere 115 Disk Operator’s Manual. It provides you with information you need to operate and maintain your John Deere 115 Disk. Issue H9.
This manual will help you with learning how to operating the Disk Safely. It is very important to be careful when operating the disk to avoid injury. You want to be sure to never ride or permit others to ride on the drawbar of the tractor or on the disk. When removing self-adjusting scrapers, always remove scraper which has spring attached to upper portion of tension lever first. When installing scrapers, always install the scraper last. Wear protective gloves to prevent injury from cutting edges of disk blades or scraper blades. Park or block the disk so it will n3t roll when disconnected from the tractor drawbar. When leaving the tractor and disk, connect safety locks or lower the disk to the ground, Only one person—the operator—should be permitted on the tractor platform while tractor and disk are in operation. Be careful when operating on hillsides because the tractor may tip sideways if it strikes a hole, ditch, or other irregularity. It’s important to lubricate the Disk Safely – this manual will show you how. Do not grease, oil. or adjust the disk while it is in motion.
Table of Contents
Safety
Identification
Preparing For Use
Attaching to Tractor
Transporting
Operating Adjustments
Trouble Shooting
Detaching From Tractor
Lubrication
Service
Attachments
Specifications
Serial Number
Index
Index of Topics
Adjusting Disking Depth
Adjusting Rigid-Type Scrapers
Angling the Gangs
Attaching to Tractor
Attaching Hydraulic Hoses
Attachments
Bearing Assembly
Bearing Wear Guard
Bearing Standard Location
Bolt Torque Chart
Checking Hydraulic System
Contents
Cushion Gang Attachment
Detaching From Tractor
Disk Blade Failures
Disk Gangs – Service
Disking Depth
Friction Pin
Furrow Filler Attachment
Gang Frame (Service)
Gang Nut Wrenches
Hitch Adapter for Clevis Drawbar
Hitch Position for Clevis Drawbar
Hitch Position for Straight or Offset
Drawbar
Identification
Initial Settings
Jack
Leveling:
For Operation
For Transport
Lubrication
Operating Adjustments
Preparing the Disk
Preparing the Tractor
Rear Wheel Weighting
Rigid-Type Scrapers:
Operation
Service
Rockshaft Height Stop Lock
Rockshaft Selector Lever
Safety
Scraper Adjustments
Scrapers – Service
Scraper Bar Support Locations
Self-Adjusting Scrapers:
Operation
Service
Serial Number
Service
Slow Moving Vehicle (SMV) Emblem
Specifications
Storage
Tightening Gang Bolts
Tire Inflation
Torque Chart
Tractor Drawbar
Transporting
Trouble Shooting
Wear Guard – Bearing
Wheel Weights
