Description
This 2007 KTM 950 Super Enduro Owners Manual Paper is an authorized reproduction of the original, out of print manual. It will familiarize you with how to operate KTM 950 Super Enduro motorcycles.
It will teach you how to tune your motorcycle to your specific needs and how to protect yourself against injury. This book contains important information on motorcycle maintenance.
This manual is an important part of your motorcycle and should be passed on to any subsequent owner in case you decide to sell it. Many motorcyclists have a good working knowledge of motorcycle mechanics; if this is true in your case, you will be able to use this manual to carry out most of the maintenance steps yourself.
Take special care to follow the recommended run in, inspection, and maintenance intervals. Heeding these guidelines will significantly increase the life of your motorcycle.
Table of Contents
INTRODUCTION
IMPORTANT INFORMATION
SERIAL NUMBER LOCATIONS
Chassis number, Type label
Engine number, engine type
OPERATION INSTRUMENTS
Clutch lever
Choke lever
Hand brake lever
OPERATION INSTRUMENTS
Multi-functional digital speedometer
Display
Setting options in the display
Cooling liquid temperature display
Indicator lamps
Ignition lock
Combination switch
Flasher switch
Starter tip switch
Filler cap
Fuel taps
Grips
Removal of seat
Tool set
Shift lever
Side stand
Foot brake pedal
Compression damping of fork
Rebound damping of fork
Spring preload of the fork
Damping action during compression of shock absorber
Rebound damping of shock absorber
GENERAL TIPS AND WARNINGS FOR STARTING
THE MOTORCYCLE
Instructions for initial operation
Running in the LC8 engine
Accessories and payload
DRIVING INSTRUCTIONS
Check the following before each start
Starting when the engine is cold
Starting when the engine is warm or hot
Starting off
Shifting/Riding
Braking
Stopping and parking
Fuel, refueling
PERIODIC MAINTENANCE SCHEDULE
MAINTENANCE WORK ON CHASSIS AND ENGINE
Adjusting the fork and shock absorber
Adjusting compression damping of fork
Adjusting rebound damping of fork
Adjusting the spring preload on the fork
Compression damping of shock absorber
Rebound damping of shock absorber
Breathing the fork legs
Checking the chain tension
Correcting the chain tension
Chain maintenance
Checking the chain for wear
General informations about KTM disc brakes
Adjusting of free travel at the hand brake lever
Checking of brake fluid level – front brake
Checking the front brake pads
Checking rear brake fluid level
Checking the rear brake pads
Dismounting and mounting the front wheel
Dismounting and mounting the rear wheel
Tires, air pressure
Checking spoke tension
Battery
Charging the battery
Jump start
Main fuse
Fuses for individual power consumers
Replacing the headlight lamp
Adjusting the headlight range
Replacing the flasher bulbs
Replacing the brake light and taillight bulbs
Activating the ignition curve for low-octane fuel
Cooling system
Checking the cooling liquid level in the compensating tank
Checking the cooling liquid level in the radiator
Bleeding the cooling system
Changing the original position of the clutch lever
Checking the oil level of the hydraulic clutch
Checking and adjusting the throttle cable play
Checking and adjusting the choke cable play
Adjusting the engine idle speed
Engine oil
Checking the engine oil level
Refilling engine oil
Changing the engine oil and the oil filter,
cleaning the oil screen
TROUBLESHOOTING
CLEANING
CONSERVATION FOR WINTER OPERATION
STORAGE
RE-INITIATION AFTER TIME OF STORAGE
TECHNICAL SPECIFICATIONS – CHASSIS
TECHNICAL SPECIFICATIONS-ENGINE
Engine oil
HEAD WORD INDEX
