Description
This Used John Deere 410 and 420 Loader Factory Operator’s Manual provides you with the information you need to properly operate and care for your John Deere 410 and 420 Loaders. This is the book you need to operate your machine safely. Issue F8. Copyright 1998.
Table of Contents
Safety
Prepare the Tractor
Approved Tractors
Using Roll-Over Protective Structure (ROPS)
Keep ROPS Installed
Removing Front Weights
Approved Front Tires
Inflating Front Tires
Setting Front Tread Width
Checking Front Wheel Hardware
Approved Rear Tires
Selecting Rear Tread
Tractor Ballast Requirements
410 Loader Required Minimum
Ballasting For 4100 Tractor
420 Loader Required Minimum
Ballasting For 4200 Tractor
420 Loader Requited Minimum
Ballasting For 4300 and 4400 Tractors
420 Loader Required Minimum
Ballasting For 870 Tractor
Adding Ballast to Rear Wheels
Adding Ballast to 3-Point Hitch
Controls
Operating Control Levers
Using Float
Detaching the Loader
Prepare to Remove Loader
Remove Loader
Attaching the Loader
Prepare to Attach Loader
Attach Loader
Check Loader Operation
Transporting
Carrying Loads
Operating the Loader
Preoperating Checks
Using Ballast Box
Avoid Rollover Accidents
DO NOT HANDLE ROUND OR LARGE SQUARE BALES
Using Bucket Level Indicator
Leveling and Scraping Forward
Leveling in Reverse
Carrying Material
Removing Material from a Pile
Loading Operations
Digging
Backfilling
Attaching and Detaching Attachment
Attachments
Materials Buckets
Prepare Bucket for Tines
Attach Bucket Tines
Assemble Forklift
Install Backstops on Forklift
Ballast Box
Ballast Box Extension
Bucket Level Indicator
Assemble Bucket Level Indicator
Install Hood Guard 4100 Tractor
Install Hood Guard Tractor without Mower
Install Hood Guard 4200 Tractor with Mower
Lubrication and Maintenance
Lubricating and Maintaining Loader Safety
Observing Intervals
Selecting Grease
Alternative and Synthetic Lubricants
Lubricating Loader
Checking Transmission / Hydraulic Oil Level After Every 50 Hours of Use
Tighten Mounting Frame Hardware After first 10 and Every 50 Hours of Use 410 Loader
Tighten Mounting Frame Hardware After First 10 and Every 50 Hours of use 420 Loader on 4200, 4300 and 4400 Tractors
Tighten Mounting Frame Hardware Atter First 10 and Every 50 Hours of use 420 Loader on 70 Series Tractor.
Check Front Weight Bracket Hardware 420 Loader on 70 Series Tractors
Troubleshooting
Service
Servicing Loader Safely
Keep Service Area Clean
Metric Bolt and Cap Screw Torque Values
Folding Hood Guard 420 Loader
Servicing Tractor
Avoid High-Pressure Fluids
O-Ring Installation
Torque Procedure for Fittings
Hose Identification 410 Loader
Hose Identification 420 Loader on 4200, 4300 and 4400 Tractors
Hose Identification 420 Loader on “70” Series Tractors
Replacing Orifice
Install 90 Degree Hydraulic Fitting 420 Loader ONLY 70 Series Tractor
Check Latch Plate and Locking Lever
Storage
Removing the Loader
Lubricating the Loader
Storing the Loader
Crime Prevention
Help Prevent Crime
Record Identification Numbers
Keep Proof of Ownership
Park Indoors Out Of Sight
When Parking Outdoors
Reduce Vandalism
Report Thefts Immediately
Specifications
Specification Parameters
Performance Chart 410 Loader/4100 Tractor
Performance Chart 420 Loader/4200 Tractor
Performance Chart 420 Loader/4300 and 4400 Tractors
Performance Chart 420 Loader/870 Tractor
410 Loader Specifications on 4100 Tractor
420 Loader Specifications on 4200 Tractor
420 Loader on 4300 and 4400 Tractors
420 Loader Specifications on 870 Tractor
Record Loader Serial Number
CE Approval Specifications
Declaration of Conformity
CE Label
Decal Locations
John Deere Service Keeps You On The Job
