Description
This 198 page factory Triumph Thunderbird, Tiger 110 Trophy TR6, Bonneville 120, Speed Twin 5T, Tiger 100 and Trophy TR5 motorcycle instruction is a reproduction of the original, out of print manual. This instruction manual covers from Engine Number 0945 and D101 onwards made in 1956 and up.
Table of Contents
AC lighting and ignition equipment
Adjusting the brakes
Adjusting the steering head races
Air filter
Aligning the front fort
Alternator
Assembling ind installing the front fork
Assembling the brake drum and sprocket aisembly (rear wheel)
Assembling the clutch
Assembling the engine
Assembling the fork pressure tube
Assembling the front brake anchor pin
Assembling the front wheel
Assembling the gearbox
Assembling the rear wheel
Assembling the rear brake anchor plate
Battery
Carburetter Amal Monobloc
Carburetter (SU)
Chain alterations and repairs
Chain maintenance
Chain rivet extractor
Chains
Changing the fork springs
Changing the oil
Charts (engine revolutions and gear ratio)
Clutch and shock absorber unit
Coil
Controls
Decarbonizing
Dismantling, preparation and use of the engine
Dismantling, preparation and assembly of forks
Dismantling, preparation and assembly of gearbox
Dismantling the anchor plate assembly (rear wheel)
Dismantling the brake drum assembly (rear wheel)
Dismantling the clutch
Dismantling the engine
Dismantling the fork pressure tube assembly
Dismantling the front brake anchor plate
Dismantling the front wheel
Dismantling the gearbox
Dismantling the QD rear wheel
Dismantling the rear brake anchor plate
Dismantling the rear wheel
Distributor
Dynamo
Electrlcal Equipment
Engine (description)
Exhaust camshaft timing
Fault finding (A/C ignition)
Fault finding (General)
Fitting a sidecar
Fitting the front wheel to the fork
Fitting rear wheel to the frame
Frame
Front wheel
Gearbox
Girling suspension units
Headlamp and top nacelle unit
Horns
Ignition timing (coil)
Ignition liming (magneto)
Inlet camshaft timing
Inspection and replacement of worn parts (wheels)
Installing the engine & gearbox
Lamps
Lubrication system
Magneto
Oil pump
Oil release valve and indicator
Petrol tank mounting
Petrol tap adjustment
Primary chain adjustment
Proprietary fittings (addresses)
Racing Ignition timing
Racing valve timing
Rear chain adjustment
Rear wheel
Recommended lubricants
Removing the brake drum and sprocket
Removing the engine from the frame
Removing the front fork from the frame
Removing the front wheel from the forks
Removing the gearbox from the frame
Replacing the brake drum and sprocket in the frame
Routine maintenance
Runnlng-ln
Service arrangements
Slickshift gearchange
Sparking plugs
Speedometer drive
Starting the engine
Swinging fork
Tachometer drive
Taking over the machine
Tappet adjustment
Technical data
Telescopic forks
Timing the engine
Toolkit
Wheels
Wiring diagram
