Table of Contents

SERIAL NUMBER LOCATIONS - Chassis numbers, Engine numbers, engine type

OPERATION INSTRUMENTS - Clutch lever, Hand brake lever, Electronic speedometer, Indicator lamps (EXC), Short circuit button (SX), Combination switch (EXC), Headlamp switch (XC-W), Flasher switch, Emergency OFF switch (Australia), Filler cap, Filler cap (XC XC-W), Fuel tap, Choke knob, Shift lever, Kickstarter, Foot brake pedal, Side stand, Steering lock, Compression damping of fork, Rebound damping of fork, Damping action during compression of shock, absorber (SX), Compression damping of shock absorber (XC-W EXC) Rebound damping of shock absorber (SX XC-W EXC)

GENERAL TIPS AND WARNINGS FOR STARTING THE MOTORCVCLE - Instructions for your first ride, Running in

DRIVING INSTRUCTIONS - What you should check before each start, Starting when the engine is cold, Starting when the engine is warm, What to do when the engine is flooded, Starting off, Shifting/Riding, Braking, Stopping and parking, Refueling, fuel

PERIODIC MAINTENANCE SCHEDULE, MAINTENANCE WORK ON CHASSIS AND ENGINE - Charging the spring preloading of the shock absorber, Pivot bearing, Basic suspension setup for the weight of the driver, Checking the shock absorber and spring, Determining the static sag of the shock absorber Determining the riding sag of the shock absorber, Changing the spring preload on the telescopic fork, Checking the basic setup of the telescopic fork, Replacing fork springs, Breather plug front fork, Cleaning the dust sleeves of the telescopic fork, Changing the fork offset (caster] (SX / XC), Checking and adjusting the steering head bearing, How to change the handlebar position, Check chain tension, Correct chain tension, Chain maintenance, Chain wear, General information about KTM disc brakes, Adjusting the free travel at the hand brake lever, Checking the brake fluid level - front brake, Refilling the front brake fluid reservoir, Checking the front brake pads, Replacing the front brake pads, Changing the basic position of the foot brake pedal, Checking the rear brake fluid level, Refilling the rear brake fluid reservoir, Checking the rear brake pads, Replacing the rear brake pads, Dismounting and mounting the front wheel, Dismounting and mounting the rear wheel, Tires, air pressure, Checking spoke tension, Replacing the battery of the digital speedometer, Check/set distance of the magnetic sensor, Replacing the headlight lamp-parking light lamp, Cooling system, Radiator cover for the cold season, Checking the coolant level, Refilling and bleeding the cooling system, Cleaning the air filter, Checking the oil level of the hydraulic clutch, Exhaust system, Changing the original position of the clutch lever, Bleeding the hydraulic clutch, Carburetor adjustment, Draining the float chamber of the carburetor, Checking the float level, Engine characteristics (250/300 SX/XC/EXC), Check transmission oil level (125/200), Changing the transmission oil (125-200), Check transmission oil level (250/300), Changing the transmission oil (250/300)

CLEANING, CONSERVATION FOR WINTER OPERATION, STORAGE, TECHNICAL SPECIFICATIONS-CHASSIS 125/200, TECHNICAL SPECIFICATIONS - ENGINE 125 / 200, TECHNICAL SPECIFICATIONS - CHASSIS 250 / 300, TECHNICAL SPECIFICATIONS - ENGINE 250 / 300, INDEX, WIRING DIAGRAMS, CARBURETOR TABLE