Provides repair and maintenance information for 1992 KTM 250/300 motocross enduro models.

INTRODUCTION

WARNING - SAFETY WARNINGS

CAUTION - HINTS TO THE MOTORCYCLES

PRE-OPERATION INSTRUCTIONS

NECESSARY WORK AFTER THE FIRST USE

DRIVING INSTRUCTIONS

MAINTENANCE WORK ON CHASSIS AND ENGINE

Determining the static sag and the correct shock spring
Changing the shock spring -
Checking and adjusting the front fork static sag
How to determine whether your front fork spring is adjusted correctly
Altering the spring preload, replacing the fork springs, changing the fork oil, changing the length of the air chamber
Compression and rebound of fork and shock absorber
Adjusting compression and rebound
Adjustment guidelines - Shock absorber
Adjustment guidelines - Fork
Adjustment guidelines for special riding conditions
Projection of the forks
Standard adjustment data - Shock absorber, fork
Check and adjust steering head bearing
Servicing the rear suspension linkage
Chain tension, chain maintenance
Disc brakes - In general
Checking of brake fluid level - front brake
Setting of pressure point
Check the front brake pads
Replace brake pads - front brake
Bleed the front brake
Foot brake pedal
Checking the rear brake pads
Replacing the rear brake pads
Bleeding the rear brake
Dismounting and mounting the front wheel
Dismounting and mounting the rear wheel
Cooling system
Checking the cooland level
Bleeding the cooling system
Cleaning the air filter
Fuel system
Exhaust system
Carburetor adjustment
Check float level
Checking transmission oil level
Changing transmission oil
Decarbonize outlet control valve and exhaust port
Adjusting clutch lever
Adjusting clutch release

PERIODIC MAINTENANCE SCHEDULE

TECHNICAL SPECIFICATIONS - CHASSIS

TORQUES

WIRING DIAGRAM